Senior Design Engineer

Requirements

• Architect electronics used in our gimbals, drones, and ground control stations
• Lead design of key PCBAs from concept through production
• Identify new components and technologies to advance state of the art
• Design PCBAs, perform trade off studies, circuit design and analysis, design...

Gridware exists to enhance and protect the mother of all networks: the electrical grid. The grid touches everything, and when it grinds to a halt, the consequences can be dire: wildfires burn, land is destroyed, property is damaged, progress stops, and lives are lost.

Our team engineers an advanced sensing system to continuously analyze both the electrical and mechanical behavior of grid assets. Utilizing high-precision sensor arrays, the system identifies and allows preemptive mitigation of faults. The technology has been proven with utilities to bolster safety, reliability, and reduce customer outage durations. The demand for power will only increase. We protect the grid of today while we build the grid of tomorrow.

Gridware is privately held and backed by the best climate-tech and Silicon Valley investors. We are headquartered in the Bay Area in northern California.

Role Description

Gridware is seeking an independent and mission driven electronic...

Elevate’s mission is to serve our semiconductor and system test customers by providing world class test integrated circuits (ICs) that address the industry’s most complex ATE challenges. We strive to exceed our customer’s expectations, now and well into the future, through designing the lowest power/highest density solutions, with the goal of providing the lowest possible cost of test.

Join our innovative team as a Senior Analog Design Engineer and contribute to the forefront of technology. As a key member of our engineering department, you will play a pivotal role in designing and optimizing analog circuits for our cutting-edge electronic systems.

Responsibilities

• Design and simulate schematics for a diverse range of high-speed and precision CMOS ATE circuits.
• Perform layout, verification, and post-layout simulation for circuits, incorporating Monte Carlo, SOAC, and corner analysis. Conduct mixed-signal simulation at both channel...

Under routine supervision, primarily responsible for the development of new products and or the enhancement of existing products. Lead or serve as a member of a project team. Involved in creating designs, modeling and drafting utilizing a 3D CAD system. Other responsibilities include assisting in the development processes for Manufacturing, Quality Control, Regulatory and Planning for their particular project.

Essential Duties and Responsibilities

• Designs and develops biologics products from concept to full launch
• Leads the development of new products and manufacturing processes and/or serves as a member of a project team
• Directs the development of working prototype models to be used for project design evaluation
• Manage designers or coops
• Generates protocols for testing and analyzing new and current products
• Generates design assurance documentation for the project Design History File (DHF)
...

CDR Maguire Engineering, a multi-disciplinary engineering firm, has an immediate hiring need for a qualified Senior Highway Design Engineer with minimum 5+ years of experience for our Warrendale (Pittsburgh), PA location.

This role will be responsible for performing a variety of complex design and plan preparation functions on multiple projects, as well as checking the work of other engineers. The position will function as a work group leader in the development of PS&E packages and/or a portion of PS&E packages. It is expected the position may act as Work Group Leader on small projects and segments of larger projects in support of the Project Managers in the division.

CDR Maguire delivers engineering consulting services, emergency management solutions, and disaster health and medical services. Founded in 1938, the firm has grown with offices across the nation. Serving clients in New England, Pennsylvania, and Florida, CDR Maguire Engineering is...

• Compliance and enforcement of company Health, Safety and Environment polices, and governmental policies and regulations as they apply.
• Engineer, test & commission electrical, instrumentation such as meters, PLCs, SERs, LV and MV breakers, UPS systems, Generators, etc.
• Engineer, design, & review network diagrams, electrical distribution equipment.
• Apply knowledge to develop necessary project documentation such as network topology, BOM, project schedule, and close-out documentation.
• Program, configure, and troubleshoot interfaces to PLC/HMI/Power Meters/SCADA systems.
• Design, configure, and implement process network infrastructure (Ethernet, Modbus, IEC61850, etc.).
• Develop and engineer electrical schematics, wiring diagrams, and PLC logic.
• Interface and communicate with vendors, process engineering, installation contractors, and project management.
• Hands on support for commissioning/start-up...

CDR Maguire Engineering, a multi-disciplinary engineering firm, has an immediate hiring need for a qualified Senior Highway Design Engineer with minimum 5+ years of experience for our Mechanicsburg, PA location. This position can also be open to our Allentown, Williamsport or Pittsburgh, PA offices.

This role will be responsible for performing a variety of complex design and plan preparation functions on multiple projects, as well as checking the work of other engineers. The position will function as a work group leader in the development of PS&E packages and/or a portion of PS&E packages. It is expected the position may act as Work Group Leader on small projects and segments of larger projects in support of the Project Managers in the division.

CDR Maguire delivers engineering consulting services, emergency management solutions, and disaster health and medical services. Founded in 1938, the firm has grown with offices across the nation. Serving...

CDR Maguire Engineering delivers solutions that move people, and we are looking for a Senior Structural/Bridge Design Engineer to join our Transportation Engineering Division in our Mechanicsburg, PA office. This role will be responsible for performing a variety of complex design and plan preparation functions with limited supervision and guidance, including engineering computations, cost estimates, checking, report writing, etc.

ESSENTIAL FUNCTIONS:

• Perform structural engineering design tasks as assigned by Project Manager, including preparing engineering calculations, quantities, sketches, layout drawings, etc.
• Perform bridge related geometry, including COGO geometry.
• Promote excellent internal and external client service throughout the organization.
• Perform structural engineering design functions with minimal supervision, guidance, including engineering computations, report...

Job Title: Senior Design Verification Engineer

Location: Plano, TX (hybrid)

Company Overview:

Iontra is a Denver, Colorado-based technology company revolutionizing the electrification movement by creating innovative charge-control solutions. We are reinventing the way batteries are charged to unlock their untapped performance. To us, batteries are more than just power sources. They’re the enablers of innovation and key to accelerating electrification adoption, and we’re proud to be leading the charge. Our third-party validated charge-control solution improves battery performance metrics, such as charge speed and cycle life, by 2x to 4x, no matter the size or complexity of the product.

Role Summary:

In this role, you’ll be tasked with per forming essential duties as a part of both the Iontra research team and the product development team. The candidate should be willing to adapt to...

• Lead and manage the civil design team throughout all project phases

• Develop and implement civil engineering design standards and procedures

• Perform civil engineering calculations, analysis, and design of site development, grading, drainage, stormwater management, and utility systems

• Prepare and review technical reports, drawings, and specifications

• Collaborate with clients, architects, and other stakeholders to understand project requirements and provide innovative design solutions

• Ensure compliance with applicable codes, regulations, and permitting requirements

• Coordinate with other engineering disciplines to ensure interdisciplinary coordination and integration

• Review and evaluate contractor submittals and RFIs during construction

• Monitor project progress, provide engineering support, and resolve design-related issues

• Mentor and train junior engineers

Requirements

• Bachelor's...

RMF Engineering, Inc has an immediate need for a Senior Mechanical Design Engineer to join the Boston, Massachusetts office to work with a cross-functional team on mechanical building systems and projects.

Duties

The Senior Mechanical Engineer will perform engineering calculations, code analysis, and lead the mechanical design for all phases of a project.  Furthermore, the engineer will provide guidance, technical direction, and mentorship to support team members including other mechanical engineers/designers. The engineer should be self-driven to complete design and analysis tasks for projects as well as coordinate design and design issues with the project manager, team members and outside design consultants.  

The Mechanical Engineer will be responsible for:

• Mechanical systems design and equipment specification.
• Code analysis.
• Energy modeling.
• Sustainability certification documentation...

Location: ON-SITE (NOT REMOTE)

RMF Engineering is an innovative, top-ranked, national engineering firm that specializes in providing design and engineering services for all aspects of building and utility infrastructure construction. RMF offers a balanced benefits package that centers on a stable and professional working environment which includes above standard health and dental insurance, paid holidays, paid vacation, and 401K plan.

RMF Engineering, Inc is seeking is currently seeking a Senior Electrical Designer in our Baltimore office. The Senior Electrical Engineer tasks and functions associated with the design and construction administration support of low voltage systems, power distribution systems, fire alarm systems, and lighting systems. Project types include healthcare, laboratories, higher education, and government facilities.  

Responsibilities:

• Power distribution, including riser diagrams and panel...

CDR Maguire Engineering, a multi-disciplinary engineering firm, has an immediate hiring need for a qualified Senior Highway Design Engineer with minimum 5+ years of experience for our Mechanicsburg, PA location. This position can also be open to our Allentown, Williamsport or Pittsburgh, PA offices.

This role will be responsible for performing a variety of complex design and plan preparation functions on multiple projects, as well as checking the work of other engineers. The position will function as a work group leader in the development of PS&E packages and/or a portion of PS&E packages. It is expected the position may act as Work Group Leader on small projects and segments of larger projects in support of the Project Managers in the division.

CDR Maguire delivers engineering consulting services, emergency management solutions, and disaster health and medical services. Founded in 1938, the firm has grown with offices across the nation. Serving...

CDR Maguire Engineering, a multi-disciplinary engineering firm, has an immediate hiring need for a qualified Senior Highway Engineer with minimum 5+ years of experience for our Pittsburgh (Warrendale), PA location. This role will be responsible for performing a variety of complex design and plan preparation functions on multiple projects, as well as checking the work of other engineers. The position will function as a work group leader in the development of PS&E packages and/or a portion of PS&E packages. It is expected the position may act as Work Group Leader on small projects and segments of larger projects in support of the Project Managers in the division.

CDR Maguire delivers engineering consulting services, emergency management solutions, and disaster health and medical services. Founded in 1938, the firm has grown with offices across the nation. Serving clients in New England, Pennsylvania, and Florida, CDR Maguire Engineering is a...

CDR Maguire Engineering delivers solutions that move people, and we are looking for a Senior Structural/Bridge Design Engineer to join our Transportation Engineering Division in our Mechanicsburg, PA office. This role will be responsible for performing a variety of complex design and plan preparation functions with limited supervision and guidance, including engineering computations, cost estimates, checking, report writing, etc.

ESSENTIAL FUNCTIONS:

• Perform structural engineering design tasks as assigned by Project Manager, including preparing engineering calculations, quantities, sketches, layout drawings, etc.
• Perform bridge related geometry, including COGO geometry.
• Promote excellent internal and external client service throughout the organization.
• Perform structural engineering design functions with minimal supervision, guidance, including engineering computations, report...

CDR Maguire Engineering, a multi-disciplinary engineering firm, has an immediate hiring need for a qualified Senior Highway Design Engineer with minimum 5+ years of experience for our Allentown, PA location. This role will be responsible for performing a variety of complex design and plan preparation functions on multiple projects, as well as checking the work of other engineers. The position will function as a work group leader in the development of PS&E packages and/or a portion of PS&E packages. It is expected the position may act as Work Group Leader on small projects and segments of larger projects in support of the Project Managers in the division.

CDR Maguire delivers engineering consulting services, emergency management solutions, and disaster health and medical services. Founded in 1938, the firm has grown with offices across the nation. Serving clients in New England, Pennsylvania, and Florida, CDR Maguire Engineering is a full-service...

• Compliance and enforcement of company Health, Safety and Environment polices, and governmental policies and regulations as they apply.
• Engineer, test & commission electrical, instrumentation such as meters, PLCs, SERs, LV and MV breakers, UPS systems, Generators, etc.
• Engineer, design, & review network diagrams, electrical distribution equipment.
• Apply knowledge to develop necessary project documentation such as network topology, BOM, project schedule, and close-out documentation.
• Program, configure, and troubleshoot interfaces to PLC/HMI/Power Meters/SCADA systems.
• Design, configure, and implement process network infrastructure (Ethernet, Modbus, IEC61850, etc.).
• Develop and engineer electrical schematics, wiring diagrams, and PLC logic.
• Interface and communicate with vendors, process engineering, installation contractors, and project management.
• Hands on support for commissioning/start-up...

CDR Maguire Engineering delivers solutions that move people, and we are looking for a Senior Structural/Bridge Design Engineer to join our Transportation Engineering Division in our Mechanicsburg, PA office. This role will be responsible for performing a variety of complex design and plan preparation functions with limited supervision and guidance, including engineering computations, cost estimates, checking, report writing, etc.

ESSENTIAL FUNCTIONS:

• Perform structural engineering design tasks as assigned by Project Manager, including preparing engineering calculations, quantities, sketches, layout drawings, etc.
• Perform bridge related geometry, including COGO geometry.
• Promote excellent internal and external client service throughout the organization.
• Perform structural engineering design functions with minimal supervision, guidance, including engineering computations, report...

CDR Maguire Engineering, a multi-disciplinary engineering firm, has an immediate hiring need for a qualified Senior Highway Design Engineer with minimum 5 - 15+ years of experience for our Allentown, PA location. This role will be responsible for performing a variety of complex design and plan preparation functions on multiple projects, as well as checking the work of other engineers. The position will function as a work group leader in the development of PS&E packages and/or a portion of PS&E packages. It is expected the position may act as Work Group Leader on small projects and segments of larger projects in support of the Project Managers in the division.

CDR Maguire delivers engineering consulting services, emergency management solutions, and disaster health and medical services. Founded in 1938, the firm has grown with offices across the nation. Serving clients in New England, Pennsylvania, and Florida, CDR Maguire Engineering is a full-service...

CDR Maguire Engineering, a multi-disciplinary engineering firm, has an immediate hiring need for a qualified Senior Highway Design Engineer with minimum 5-15+ years of experience for our Mechanicsburg, PA location. This position can also be open to our Allentown, Williamsport or Pittsburgh, PA offices.

This role will be responsible for performing a variety of complex design and plan preparation functions on multiple projects, as well as checking the work of other engineers. The position will function as a work group leader in the development of PS&E packages and/or a portion of PS&E packages. It is expected the position may act as Work Group Leader on small projects and segments of larger projects in support of the Project Managers in the division.

CDR Maguire delivers engineering consulting services, emergency management solutions, and disaster health and medical services. Founded in 1938, the firm has grown with offices across the nation....

CDR Maguire Engineering, a multi-disciplinary engineering firm, has an immediate hiring need for a qualified Senior Highway Engineer with minimum 5-15+ years of experience for our Pittsburgh (Warrendale), PA location. This role will be responsible for performing a variety of complex design and plan preparation functions on multiple projects, as well as checking the work of other engineers. The position will function as a work group leader in the development of PS&E packages and/or a portion of PS&E packages. It is expected the position may act as Work Group Leader on small projects and segments of larger projects in support of the Project Managers in the division.

CDR Maguire delivers engineering consulting services, emergency management solutions, and disaster health and medical services. Founded in 1938, the firm has grown with offices across the nation. Serving clients in New England, Pennsylvania, and Florida, CDR Maguire Engineering is a...

We are actively hiring in the UK and US.

ALL.SPACE is seeking a Mechanical Engineer and CAD Administrator with proven history in the mechanical design & development of components, sub-systems and complete products from concept through to release for manufacture. This includes supporting products in manufacture and deployment. Main components typically include injection moulded and pressure diecast, sheet metal housings, electronic enclosures, custom cables, labels and fittings. 

Experience in the design and analysis of static and dynamic equipment, deployed within exposed and harsh environments would be a distinct advantage. 

Reporting into the Director of Mechanical Engineering the Senior Mechanical Engineer is expected to manage their own day to day work schedule, to mentor and support junior members of the department, and to act as a mechanical advisor to other disciplines within the organisation. 

The Senior...

CDR Maguire Engineering delivers solutions that move people, and we are looking for a Structural/Bridge Design Engineer to join our Transportation Engineering Division in our Mechanicsburg, PA office. This role will be responsible for performing a variety of complex design and plan preparation functions with limited supervision and guidance, including engineering computations, cost estimates, checking, report writing, etc.

ESSENTIAL FUNCTIONS:

• Perform structural engineering design tasks as assigned by Project Manager, including preparing engineering calculations, quantities, sketches, layout drawings, etc.
• Perform bridge related geometry, including COGO geometry.
• Promote excellent internal and external client service throughout the organization.
• Perform structural engineering design functions with minimal supervision, guidance, including engineering computations, report...

Quadric has created an innovative general purpose neural processing unit (GPNPU) architecture. Quadric's co-optimized software and hardware is targeted to run neural network (NN) inference workloads in a wide variety of edge and endpoint devices, ranging from battery operated smart-sensor systems to high-performance automotive or autonomous vehicle systems. Unlike other NPUs or neural network accelerators in the industry today that can only accelerate a portion of a machine learning graph, the Quadric GPNPU executes both NN graph code and conventional C++ DSP and control code.

If making an impact and having a seat at the table is important to you, this is the opportunity for you. Join our small, rapidly-growing team at Quadric to develop supercomputer technology designed for the Edge. In this position you will be a core member of our hardware team, reporting to the CTO and will have an opportunity to grow in the company of expert technologists who also happen to be good...

The Senior Design Engineer will be primarily responsible for the development of new products and/or the enhancement of existing products. Involved in creating concepts and modeling and drafting designs utilizing 3D CAD software. Other responsibilities include drafting of design history file documents, development of test plans to assess designs, and assisting in the development of processes for Manufacturing, Quality Control, Regulatory and Planning.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Designs and develops surgical instruments utilizing SolidWorks.
• Assists in the development of new products and manufacturing processes and/or serves as a member of a development team.
• Assists in the development of working models to be used for design evaluation.
• Generates protocols for testing and analyzing new and current products.
• Generates design assurance documentation for the project Design History File...

CDR Maguire Engineering delivers solutions that move people, and we are looking for a Structural/Bridge Design Engineer to join our Transportation Engineering Division in our Mechanicsburg, PA office. This role will be responsible for performing a variety of complex design and plan preparation functions with limited supervision and guidance, including engineering computations, cost estimates, checking, report writing, etc.

ESSENTIAL FUNCTIONS:

• Perform structural engineering design tasks as assigned by Project Manager, including preparing engineering calculations, quantities, sketches, layout drawings, etc.
• Perform bridge related geometry, including COGO geometry.
• Promote excellent internal and external client service throughout the organization.
• Perform structural engineering design functions with minimal supervision, guidance, including engineering computations, report...

• Compliance and enforcement of company Health, Safety and Environment polices, and governmental policies and regulations as they apply.
• Engineer, test & commission electrical, instrumentation such as meters, PLCs, SERs, LV and MV breakers, UPS systems, Generators, etc.
• Engineer, design, & review network diagrams, electrical distribution equipment.
• Apply knowledge to develop necessary project documentation such as network topology, BOM, project schedule, and close-out documentation.
• Program, configure, and troubleshoot interfaces to PLC/HMI/Power Meters/SCADA systems.
• Design, configure, and implement process network infrastructure (Ethernet, Modbus, IEC61850, etc.).
• Develop and engineer electrical schematics, wiring diagrams, and PLC logic.
• Interface and communicate with vendors, process engineering, installation contractors, and project management.
• Hands on support for commissioning/start-up...

Hire Resolve’s client is a leading Civil Engineering firm that is urgently seeking the expertise of a Senior Design Engineer in New York, NY.

Responsibilities:

• Engage in valuable interactions with external clients
• Perfect your technical site design knowledge and "hands on" plan preparation experience while sharing your expertise with your team
• Design site plans for some of the most recognizable brand name clients across a wide spectrum of industries
• Immerse yourself in the project management lifecycle from initial project scoping through project closeout
• Partner with your manager to tailor your career path towards YOUR vision- a technical design expert or project/staff management

Requirements

• The ability to learn quickly, strong communication skills, and a solid work ethic
• A passion for design and creative problem-solving
• Bachelor's degree in...

Position Overview:

We are seeking a highly skilled and motivated Design Engineer to lead our design team in the development of plans and specifications for our water capital improvement projects. The Design Engineer will play a crucial role in ensuring the successful completion of design projects, meeting established goals, and adhering to schedules and budgets. The ideal candidate will bring extensive experience in water infrastructure design, strong leadership capabilities, and a commitment to delivering high-quality engineering solutions.

Role Functions:

• Leads a design team to perform or manage the preparation of site plans, including preparing grading plans to balance earthwork, developing stormwater capture and conveyance design, and ensuring vehicular access to pumps, wells, treatment systems, and conveyance system
• Prioritizes assigned design projects within the area of responsibility. Monitors and...

Job Title: Senior Design Verification Engineer

Location: Plano, TX (hybrid)

Company Overview:

Iontra is a Denver, Colorado-based technology company revolutionizing the electrification movement by creating innovative charge-control solutions. We are reinventing the way batteries are charged to unlock their untapped performance. To us, batteries are more than just power sources. They’re the enablers of innovation and key to accelerating electrification adoption, and we’re proud to be leading the charge. Our third-party validated charge-control solution improves battery performance metrics, such as charge speed and cycle life, by 2x to 4x, no matter the size or complexity of the product.

Role Summary:

In this role, you’ll be tasked with per forming essential duties as a part of both the Iontra research team and the product development team. The candidate should be willing to adapt to...